Checking the status

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Start the engine and run it to normal operating temperature
• Read off and note the adaptation value for the camshaft at idle speed. The value must be between -8° and +8°.

  The fault is intermittent if the adaptation value is between -8° and +8°. The fault is permanent if the adaptation value is lower than -8° or higher than +8°.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Camshaft Position Angle

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the adaptation value correct? 

• YES 

  Refer to Intermittent fault 

• NO 

  Refer to Checking components