Faulty signal: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Reinstall the connectors, components etc.
• Start the engine.

  Check the ACTUAL- and DESIRED- values when the control starts this takes approximately 2 minutes.

  The ACTUAL value should follow the DESIRED- value.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Camshaft Reset Valve (Continuous Variable Valve Timing (CVVT))

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the ACTUAL- value follow the DESIRED- value? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information