Checking The Wiring

Check signal cable for an open-circuit and short-circuit to supply voltage.

Take readings between:

• Engine Control Module (ECM) terminal #B48 (#B58) and terminal #2 of control module cooling fan.

If no faults are found via the aforementioned fault tracing, replace the control module cooling fan.

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the breakout box
• See Contents .

Fig 1: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Engine Cooling Fan (FC) Control Modules

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Information