Checking the wiring and component
Check the cable between control module terminal #B44 (#B54) and air conditioning (A/C) relay terminal #4. Check for a short-circuit to ground. See Short-circuit to ground, permanent faults . Check for an open-circuit. See Open-circuit, permanent faults .
Check the cable between air conditioning (A/C) relay terminal #2 and fuse 5 (in the engine compartment integrated relay / fusebox). Check for an open-circuit. See Open-circuit, permanent faults .
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box
- To access and replace the air conditioning (A/C) relay, see Replacing relays in the main fuse box and other relays in the engine compartment
- For information about signals, see Signal specification .
Was a fault found in the wiring?
- YES
Refer to Verification
- NO