Signal too low: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reconnect the connectors, reinstall components etc.
• Ignition on
• Activate the evaporative emission system (EVAP) valve.

  A click should be heard when the evaporative emission system (EVAP) valve is activated.

  Fig 3: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the evaporative emission system (EVAP) valve working? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information