LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Crankcase Ventilation, Intake And Exhaust System - Cleaning, Inspection And Adjustment >> Crankcase Ventilation And Electronic Throttle Module (ETM) (B5234T3; B5244T3; 2001) >> Crankcase ventilation and electronic throttle module (ETM), cleaning >> Removing >> Removing the fan shroud

Removing the fan shroud

Fig 1: Identifying Air Cleaner Inlet Pipe And Engine Cooling Fan Connector
GLL154875Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the inlet pipe to the air cleaner (ACL) housing.

Disconnect both the connectors for the engine cooling fan (FC).

Remove: 

NOTE:

Certain vehicles have three tie straps and a clip holding the cable harness at the fan shroud.

Lift out the hose for the expansion tank from the holders on top of the fan shroud

Remove the 2 x screws holding the fan shroud.

Carefully lift up the engine cooling fan (FC).

scientia non olet · About LEMON Manuals