LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Crankcase Ventilation, Intake And Exhaust System - Cleaning, Inspection And Adjustment >> Crankcase Ventilation And Electronic Throttle Module (ETM) (B5234T3; B5244T3; 2001) >> Crankcase ventilation and electronic throttle module (ETM), cleaning >> Installing >> Installing the fan shroud

Installing the fan shroud

Fig 1: Identifying Cable Harness, Tie Straps And Harness Holder
GLL147982Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully lower the fan shroud and align with the holders. Route the cable harness behind the holder (3).

Tighten the 2 x mounting screws.

Press the hose down from the expansion tank into the holder on the fan shroud

Secure the cable harness by the fan shroud using tie straps (1) and (2), see the illustration.

Install the evaporative emission system (EVAP) valve.

Connect the engine cooling fan (FC) connectors.

scientia non olet · About LEMON Manuals