LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Variable Valve Timing Unit - Checking & Adjusting >> Variable Valve Timing Unit >> Variable Valve Timing Unit, Checking And Adjusting (B5244S6; 2003-2006) >> Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft >> Tensioning of cambelt

Tensioning of cambelt

Fig 1: Position Of Indicator When Aligning Timing Belt Tensioner
GLL148924Courtesy of VOLVO CARS OF NORTH AMERICA.

This adjustment is to be made with a cold engine.

A suitable temperature is approximately 20°C/68°F.

At a higher temperature, for example with a warm engine or a higher ambient temperature, the needle is further to the right.

The graphic shows the position of the indicator when aligning the timing belt tensioner at approximately 20°C/68°F.

NOTE: There are two different tensioners depending on model year.

Fix the belt tensioner center screw in position and turn the belt tensioner eccentric clockwise until the tensioner indicator passes the marked position and reaches the end position. Then turn the eccentric back so the indicator reaches the marked position shown. Tighten the center screw. See Summary Of Specific Components And Tightening Torques .

Check that the indicator is in the correct position.

scientia non olet · About LEMON Manuals