LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Variable Valve Timing Unit - Checking & Adjusting >> Variable Valve Timing Unit >> Variable Valve Timing Unit, Checking And Adjusting (B5244S; 2001-2006) >> Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft >> Installing the crankshaft adjustment tool

Installing the crankshaft adjustment tool

Fig 1: Identifying Starter Motor
GLL108757Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the mounting screws for the starter motor.

Pull out the starter motor and place it to one side.

Remove the blind cover plug from the hole for the adjustment tool. Turn the crankshaft clockwise slightly.

Install 9995451 . Ensure that the tool bottoms out against the cylinder block.

scientia non olet · About LEMON Manuals