LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Variable Valve Timing - Checking, Adjustment, Removal & Installation >> Engine Timing/Timing Belt >> Variable valve timing unit, checking and adjusting >> Install and adjust variable valve timing unit/gear pulley on camshafts >> Install crankshaft adjustment tool

Install crankshaft adjustment tool

Remove the starter motor mounting screws. Pull out the starter motor and put it aside.

Remove the blind cover plug from the hole for the adjustment tool.

Turn the crankshaft clockwise  slightly.

Install: 9995451 . Ensure that the tool bottoms out against the cylinder block.

scientia non olet · About LEMON Manuals