Installing components

Install: 

• the trigger wheel. Tighten the screw
• the camshaft position (CMP) sensor housing. Tighten the screws
• the lower and upper torque rod bracket on the cylinder head. Tighten. See Tightening torque

Fig 1: Identifying Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the front timing belt cover
• the cover over the ignition coils
• the upper timing belt cover
• the auxiliaries belt
• the expansion tank
• the power steering fluid reservoir. Check that the hoses are correctly positioned
• the starter motor. Tighten the screws at the gearbox unit. See Tightening torque .

Fig 2: Identifying Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the intake air hose between the turbocharger (TC) and the air cleaner (ACL) cover
• air cleaner (ACL) assembly
• the intake pipe between the air cleaner (ACL) and the front cover plate
• the charge air pipe above the engine. Remove the seals
• the engine stabilizer brace
• the cable to the battery negative terminal. First read Battery, disconnecting .