Installing components

Install: 

• the nuts for the cover in the wing liner
• the right front wheel.

Fig 1: Identifying Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the trigger wheel. Tighten the screw
• the camshaft position (CMP) sensor housing. Tighten the screws
• the engine stabilizer brace on the cylinder head
• the cover over the ignition coils
• the charge air pipe over the engine.

Remove: 

• the air cleaner (ACL) cover and the intake air hose
• the solenoid valves on the air cleaner (ACL) cover
• the engine stabilizer brace. Tighten the screws
• the screw holding the engine stabilizer brace to the bracket on the engine. Tighten.

Check the engine compartment. Wipe the engine compartment clean.