Removing components around expansion tank

Fig 1: Identifying Expansion Tank

Courtesy of VOLVO CARS OF NORTH AMERICA.

Disconnect the connector for the level sensor in the expansion tank.

Remove: 

• the hoses for the heater unit at the terminal in the firewall
• the bleed hose for the radiator at the expansion tank
• the ABS line and clips from the power steering hose. Lift up the expansion tank and servo oil reservoir. Place them on top of the engine.

Fig 2: Identifying Engine Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• control module unit cover
• the control modules. Use brace 9995722
• the surround for the control module box.