Removal (the illustrations may vary per model)

Fig 1: Identifying Fender Liner And Nuts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Raise the car.

Remove 

• the right front wheel
• both the plastic nuts and the reinforcement panel holding the cover in the right fender liner. Bend the fender liner out of the way.

Fig 2: Identifying Right Engine Mount

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove 

• the four screws for the right engine pad
• the splash guard under the engine.

Fig 3: Identifying Jack Stand And Special Tool 999 5972

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Position a mobile jack with universal plate 9995972 under the oil pan on the right side of the engine
• Check that the plate does not catch in the sub-frame
• Carefully lift the engine slightly so that the engine pad can be removed.