LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Engine Mounting (B5204T5; 2004-2007) >> Bushing sub-frame, replacing >> Installing the bracket for the heated oxygen sensor (HO2S)

Installing the bracket for the heated oxygen sensor (HO2S)

Fig 1: Identifying Heated Oxygen Sensor (HO2S) & Mounting
GLL105503Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift up the sub-frame slightly, approximately 50 mm  from the car body.

Install the wiring for the heated oxygen sensor (HO2S) on the sub-frame (does not apply to diesel cars).

scientia non olet · About LEMON Manuals