Removing the fuel rail

Fig 1: Identifying Fuel Rail, Injector Lines And Fuel Pressure Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the clamp for the injector lines at the cylinder head's trailing edge.

Unplug the connectors for the injector valves and the fuel pressure sensor as well as the water temperature sensor.

Remove the fuel rail's attaching screws. Refer to: Fuel line, lock .

Spray universal oil or similar around the injector connectors on the intake manifold

Gently work the fuel rail and injectors loose.

Separate the fuel line quick-release connector.

Carefully put the fuel rail to one side.