LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B5244T5; 2005-2009) >> Cylinder head/gasket, replacement >> Installation >> Installing the cylinder head

Installing the cylinder head

Fig 1: Identifying Cylinder Head Bolt Tightening Sequence
GLL108950Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that all studs at the exhaust ports are tightened

Lubricate the studs with paste 116 1408  .

Install a new cylinder head gasket.

Get help and install the cylinder head.

Lubricate and install all the screws (use new screws).

Tighten the screws as illustrated. Tighten. See Summary of specific components and tightening torques . Use protractor 9512050 .

scientia non olet · About LEMON Manuals