Cylinder head/gasket, replacement: Installation: Cleaning
WARNING:
Use a fume hood or extractor when using gasket solvent
Clean the gasket faces for:
- the manifold. Check that the studs are tightened
- the coolant bypass channel
- the thermostat housing
- the intake manifold
- the cylinder block
- camshaft cover.
Blow the oil ducts clean.
NOTE:
Use a razor blade or a gasket scraper and gasket solvent P/N 1161 440.
Use emery cloth 951 1024 to clean the shaft journal and mating surface.
NOTE:
Clean in the direction around the shaft journal, not in and out. It is essential that any residue from the emery cloth and any other impurities are completely removed before the new seal ring is installed.
Use emery cloth 951 1024 to clean the shaft journal and mating surface.
NOTE:
Clean in the direction around the shaft journal, not in and out. It is essential that any residue from the emery cloth and any other impurities are completely removed before the new seal ring is installed.