Adjusting the timing belt

Fig 1: Identifying Belt Between Intake Camshaft Pulley, Idler Pulley And Crankshaft

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Check that the VVT-units are in their end-position.

Turn the eccentric back so that the indicator reaches the marked position in the center of the window. Remember to hold the center screw secure at the same time.

Hold the eccentric secure and tighten the center screw according to Summary of specific components and tightening torques .

Check that the indicator is in the correct position.

Fig 2: Identifying Camshaft Adjustment Tool 9995452 Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

camshaft adjustment tool 9995451 .
crankshaft stop 9995452 . Install the plug with new sealing washer. Tighten according to Tightening torque .