Installing components

Fig 1: Identifying Expansion Tank And Servo Oil Reservoir

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• front timing cover
• the auxiliaries belt
• the expansion tank
• the servo oil reservoir
• the bleed hose for the expansion tank. Tighten the clamp.

Check that the hoses are positioned correctly.

Connect the connectors for: 

• The ABS sensor by the right suspension turret
• the coolant level sensor in the expansion tank.

Fig 2: Identifying Engine Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install 

• the starter motor
• the trigger wheel. Ensure that the trigger wheel is correctly positioned against the camshaft
• the camshaft position (CMP) sensor housing
• the upper torque rod bracket.