LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B5244S6; 2003-2006) >> Cylinder head/gasket, replacing >> Installing the cylinder head >> Applying liquid gasket

Applying liquid gasket

Fig 1: Identifying Liquid Gasket Application
GLL108881Courtesy of VOLVO CARS OF NORTH AMERICA.

Wipe the oil film off the mating surfaces on the camshaft cover and cylinder head.

Install new O-rings around the spark plug wells at the cylinder head.

Apply liquid gasket 116 1059 on the camshaft cover.

Use roller 9512767 .

The surface must be completely covered without any excess.

CAUTION:

Make sure that no liquid gasket gets into the oil channels.

scientia non olet · About LEMON Manuals