LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Removal, Replacement And Installation >> Cylinder Head (B5244S; 2001-2006) >> Cylinder head/gasket, replacing >> Installing the cylinder head >> Installing the intake pipe for the coolant pump

Installing the intake pipe for the coolant pump

Fig 1: Identifying Coolant Pump Intake Pipe
GLL102980Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the inlet pipe for the coolant pump on the cylinder head. Use a new gasket.

NOTE:

Apply thread sealant, P/N 116 056, to the screw threads.

scientia non olet · About LEMON Manuals