Removing the carrier plate

Remove the engine speed (RPM) sensor with the bracket. Place it to one side.

Fig 1: Identifying Blocking Carrier Plate Using Gear Sector 9995112

Courtesy of VOLVO CARS OF NORTH AMERICA.

Block the carrier plate with: 9995112 .

Remove: 

• all screws
• the carrier plate
• 9995112 .

Fig 2: Identifying Crankshaft Seal Checked For Leakage

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check the crankshaft seal for leakage.

To replace the crankshaft seal, refer to the car model and year.