LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubricating And Oil System - Removal, Replacement And Installation >> Oil Pump And Line (B5244T5; 2005-2009) >> Oil pump / crankshaft seal, front, replacing >> Removal >> Removing the crankshaft pulley

Removing the crankshaft pulley

Fig 1: Identifying Crankshaft Belt Pulley Removal
GLL108734Courtesy of VOLVO CARS OF NORTH AMERICA.

Use: 9986187 and two of the vibration damper screws.

Tighten both the screws by hand to stop in the pulley.

CAUTION:

Ensure that the tool claws do not damage the pulley teeth.

Install the puller so that the claws engage in the screws, not in the camshaft pulley.

scientia non olet · About LEMON Manuals