LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubricating And Oil System - Removal, Replacement And Installation >> Oil Pump And Line (B5244S; 2001-2006) >> Oil pump / crankshaft seal, front, replacing >> Install the vibration damper

Install the vibration damper

Fig 1: Identifying Vibration Damper And Special Tool 999 5433
GLL108712Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the vibration damper.

Tighten the center nut. Tighten to 180 Nm  .

Use counterhold 9995433 .

Remove the counterhold. Tighten the screws. Tighten to 25 Nm  .

Angle-tighten 30°  . Use bevel protractor 9512050 .

scientia non olet · About LEMON Manuals