Oil pump / crankshaft seal, front, replacing: Finishing

Fig 1: Identifying Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• front timing belt cover.

  Tighten to 12 Nm 

• the upper timing belt cover
• the auxiliaries belt
• the expansion tank and servo reservoir
  NOTE:

  Ensure that the hoses are correctly positioned.

• the engine stabilizer brace. Tighten the screws at the suspension turrets. Tighten to 50 Nm  . Tighten the engine bracket screw. Tighten to 80 Nm  .