LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Catalytic Converter, Intake And Exhaust System - Removal, Replacement And Installation >> Turbocharger (B5244T5; 2005-2009) >> Turbocharger (TC), replacing >> Removal >> Removing the drive shaft

Removing the drive shaft

Fig 1: Identifying Drive Shaft
GLL109861Courtesy of VOLVO CARS OF NORTH AMERICA.

Press out the wheel spindle. Detach the drive shaft from the hub. Do not damage the drive shaft boot. Use a tensioner band to pull the spring strut backwards. Remove the screws from the bearing cap for the drive shaft.

CAUTION:

Do not pull the outer part of the shaft. Doing so could damage the axial stops in the joints.

Pull the drive shaft straight out.

scientia non olet · About LEMON Manuals