LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Catalytic Converter, Intake And Exhaust System - Removal, Replacement And Installation >> Turbocharger (B5244T5; 2005-2009) >> Turbocharger (TC), replacing >> Removal >> Removing the drive shaft from the wheel hub

Removing the drive shaft from the wheel hub

Fig 1: Identifying Wheel Knuckle, Special Tools 999 7076 And 999 5562
GLL126307Courtesy of VOLVO CARS OF NORTH AMERICA.

Fold down the control arm. Use lever: 9997076 to move the wheel spindle to the side. At the same time, install protective sleeve 999 5562 on the ball joint pinion. Hold the sleeve in place using the nut for the ball joint.

scientia non olet · About LEMON Manuals