LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Catalytic Converter, Intake And Exhaust System - Removal, Replacement And Installation >> Turbocharger (B5244T5; 2005-2009) >> Turbocharger (TC), replacing >> Installation >> Installing the bevel gear

Installing the bevel gear

Fig 1: Identifying Bevel Gear And Screws
GLL109692Courtesy of VOLVO CARS OF NORTH AMERICA.

Before installing the bevel gear, lubricate the spline joint between the transmission and the bevel gear. Use grease. See: Splines greasing .

Ensure that the mating surfaces on the transmission and bevel gear are clean. Install the bevel gear. Lightly tighten the M10 screws alternately. Tighten.

scientia non olet · About LEMON Manuals