Removing the propeller shaft

Fig 1: Identifying Matchmark On Propeller Shaft CV Joint And Special Tool 999 7057

Courtesy of VOLVO CARS OF NORTH AMERICA.

Mark the propeller shaft CV joint in relation to the bevel gear flange.

Remove the screws for the propeller shaft. Use: 9997057 . Press the shaft's joints together as much as possible. Disconnect the shaft from the bevel gear. Allow the shaft end to rest against the stabilizer bar.

Fig 1: Identifying Matchmark On Propeller Shaft CV Joint And Special Tool 999 7057

Courtesy of VOLVO CARS OF NORTH AMERICA.

Mark the propeller shaft CV joint in relation to the bevel gear flange.

Remove the screws for the propeller shaft. Use: 9997057 . Press the shaft's joints together as much as possible. Disconnect the shaft from the bevel gear. Allow the shaft end to rest against the stabilizer bar.