Removing manifold and gasket

Fig 1: Identifying Inner Heat Shield And Manifold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the inner heat shield from the manifold
• the nuts and washers holding the manifold against the cylinder head
• the manifold
• old gasket residue. Clean the gasket surfaces and check that all pin studs are tightened.

Fig 1: Identifying Inner Heat Shield And Manifold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the inner heat shield from the manifold
• the nuts and washers holding the manifold against the cylinder head
• the manifold
• old gasket residue. Clean the gasket surfaces and check that all pin studs are tightened.