LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Catalytic Converter, Intake And Exhaust System - Removal, Replacement And Installation >> Turbocharger (B5244T3, Aw50/51 AWD; B5254T2, Aw50/51 AWD; B5254T4, Aw50/51 AWD; B5254T4, M66 AWD; 2002-2007) >> Turbocharger, replacing >> Removal >> Removing bevel gear

Removing bevel gear

Fig 1: Identifying Bevel Gear And Screws
GLL109692Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

To prevent oil leakage, position the bevel gear with the bleed hole upward.

Remove the screws, 5 pcs, for the bevel gear. Pull the bevel gear straight out. Then turn it during removal.



Fig 1: Identifying Bevel Gear And Screws
GLL109692Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

To prevent oil leakage, position the bevel gear with the bleed hole upward.

Remove the screws, 5 pcs, for the bevel gear. Pull the bevel gear straight out. Then turn it during removal.

scientia non olet · About LEMON Manuals