Installing the bevel gear

Fig 1: Identifying Bevel Gear And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Before installing the bevel gear, lubricate the spline joint between the transaxle and the bevel gear using grease. See: Splines greasing .

Check that the mating surfaces on the transaxle and bevel gear are clean. Install the bevel gear. Tighten the screws, M10, crosswise to light contact. Tighten.

Fig 1: Identifying Bevel Gear And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Before installing the bevel gear, lubricate the spline joint between the transaxle and the bevel gear using grease. See: Splines greasing .

Check that the mating surfaces on the transaxle and bevel gear are clean. Install the bevel gear. Tighten the screws, M10, crosswise to light contact. Tighten.