LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Catalytic Converter, Intake And Exhaust System - Removal, Replacement And Installation >> Turbocharger (B5204T5; 2005-2007) >> Turbocharger (TC), replacing >> Removal >> Removing the drive shaft

Removing the drive shaft

Fig 1: Identifying Drive Shaft
GLL109861Courtesy of VOLVO CARS OF NORTH AMERICA.
CAUTION:

Do not pull the outer part of the shaft. Doing so could damage the axial stops in the joints.

Press out the wheel spindle. Detach the drive shaft from the hub. Do not damage the drive shaft boot. Use a tensioner band to pull the spring strut backwards. Remove the screws from the bearing cap for the drive shaft. Pull the drive shaft straight out.

scientia non olet · About LEMON Manuals