Replacing the intake manifold and gasket: Finishing

Fig 1: Identifying Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install 

• the fuel rail and the injector nozzles.

  Use new screws  . Tighten to 10 Nm  . Press the quick-release connector together until a clicking sound is heard. See Fuel line, lock

• the connectors for the injectors and the cover plate
• the crankcase ventilation hose on the top of the cam cover. Use a new clamp 
• the vacuum hoses.

  Ensure that the plastic nipple, located in the terminal at the intake for the crankcase ventilation hose, is in the correct position

• the inlet hose between the air cleaner (ACL) and throttle body (TB)
• the hose for vacuum controlled crankcase ventilation in the inlet hose
• the cover over the ignition coils
• the connectors to the throttle body (TB)
• the dip stick in the intake manifold.

Install the battery negative lead. First read Battery, disconnecting .