Installing the air cleaner (ACL)

Fig 1: Identifying Air Cleaner (ACL)

Courtesy of VOLVO CARS OF NORTH AMERICA.

HINT: Heat the pipe at the connections to facilitate installation. 

Install: 

• the charge air pipe between the electronic throttle module (ETM) and the charge air cooler (CAC). Tighten the hose clamps
• the air cleaner (ACL) (2) assembly. Tighten the screws
• the fresh air intake (1) between the air cleaner (ACL) and the front cover plate. Tighten the screws. Connect the connector to the mass air flow (MAF) sensor. Tighten the hose clamp.