LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Catalytic Converter, Intake And Exhaust System - Removal, Replacement And Installation >> Inlet And Exhaust System (B5204T5, Aw55-50/51SN; B5204T5, M56; B5254T2, M56; B5254T2, Aw55-50/51SN; 2005-2009) >> Throttle body (electronic throttle module (ETM)), replacing >> Installation >> Installing components

Installing components

Fig 1: Identifying Intake Manifold, Front Cover Plate And Air Cleaner Housing
GLL103011Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the charge air pipe between the electronic throttle module (ETM) and the charge air cooler (CAC).

NOTE:

Heat the pipe at the connections to facilitate installation.

Install the intake pipe between the front cover plate and the air cleaner (ACL) housing.

scientia non olet · About LEMON Manuals