Transferring Components

Fig 1: Heated Oxygen Sensors At TWC

Courtesy of VOLVO CARS OF NORTH AMERICA.

Transfer: 

• the SIPS member with the exhaust system mountings
• heated oxygen sensors (HO2S).

Lubricate the heated oxygen sensors (HO2S). Tighten the heated oxygen sensors (HO2S). Use tool 9995543 .

Fig 1: Heated Oxygen Sensors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Transfer the heated oxygen sensors (HO2S). Lubricate the threads using paste 1161408.

Tighten the heated oxygen sensors (HO2S). Tighten to 45 Nm  . Use tool 9995543