Removing Three-Way Catalytic Converters (TWC)/Front Exhaust Pipe
Remove:
- the nuts. Disconnect the front exhaust pipe from the turbocharger (TC)
- the nuts where the exhaust pipe divides downstream of the three-way catalytic converter (TWC)
- the center SIPS member.
Disconnect the brake pipe from the clips on the front SIPS member.
Remove the screws from the front SIPS member.
Slide the three-way catalytic converter (TWC) (with the heat deflector plate) back and then lower it.
NOTE:
To ensure that there is no exhaust leakage, see Flanged Joint, Assembling
.