Removing the Lower Steering Shaft Joint
- Set the front wheels so that they are straight
- Fold back the floor carpet
- Bend up the outer section of the steering shaft boot
- Remove the retaining clip around the boot
- Pull the boot up
- Turn the steering wheel to gain the best possible access to the steering shaft nut
- Remove the ignition key. Activate the steering wheel lock.
CAUTION:
Do not move the steering wheel. The contact reel in the SRS (supplemental restraint system) could be damaged.
Remove:
- the screw securing the mounting for the steering shaft in the joint
- the joint from the steering shaft by pressing the shaft upwards.