Replacing the coolant pump: Reinstall

Fig 1: Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall the removed components: 

• the upper camshaft belt cover
• the front camshaft belt cover.

  Tighten to 12 Nm (8.9 lb.ft) 

• install the auxiliaries belt
• reinstall the servo reservoir and expansion tank.

  Ensure that the hoses are correctly positioned

• the cross member. Tighten the screws at the suspension turret to 50 Nm (36.9 lb.ft)  and the screw for the engine bracket to 80 Nm (59.0 lb.ft) 
• the cover in the fender liner
• the wheel according to Installing wheels .

Fill the cooling system with Volvo original coolant.

Wipe clean and check the engine compartment.