Coolant pump, replacing: Reinstall

Fig 1: Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall the removed components: 

• the upper timing belt cover
• the front timing belt cover.

  Tighten to 12 Nm 

• install the auxiliaries belt
• reinstall the servo reservoir and the expansion tank.

  Ensure that the hoses are correctly positioned

• the engine stabilizer brace. Tighten the screws at the suspension turrets. Tighten to 50 Nm  . Tighten the screw for the engine bracket. Tighten to 80 Nm 
• the cover in the fender liner
• the wheel. See Installing wheels .

Fill the cooling system with Volvo original coolant.

Wipe clean and check the engine compartment.