Thermostat / temperature sensor, engine coolant, replacing: Installation: Finishing

Fig 1: Identifying Power Steering Pump Screws, Auxiliaries Belt And Upper Camshaft Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the power steering pump. Tighten the 3 x screws
• the auxiliaries belt. Use 9997109
• the upper camshaft cover.

Remove the hose clip. Refill with coolant. Use filling equipment 9512957 and cover 9512953 . Install the cap on the expansion tank.

Test drive the engine until the thermostat has opened. Check for leakage. Top-up the coolant.