Status, Seat Heater Left Front

The parameter indicates the status of the seat heating module (SHM) left front when the diagnostic trouble code (DTC) was stored.

The climate control module (CCM) receives the information via LIN communication.

OK, heating off = seat heating module (SHM) functioning, heating off.

OK, heating on = seat heating module (SHM) functioning, heating on.

Incorrect status 1 = incorrect heater pad.

Incorrect status 2 = incorrect temperature sensor.

Incorrect status 3 = seat heating module (SHM) overheated.

Incorrect status 4 = communication fault.

Incorrect status 5 = other faults.

Incorrect status 6 = seat heating module (SHM) internal fault.