Checking the wires and connectors
Check wires and connectors between central electronic module (CEM) 6E and battery for an intermittent open circuit as described in Open-circuit, intermittent faults and for a loose contact as described in Loose connections (terminals) . Check especially for any damage.
Check wires between central electronic module (CEM) 1E and ground point/ground on left A-pillar (right A-pillar, RHD) for an open circuit as described in Open-circuit, intermittent faults . Check especially for any damage.
Do the necessary corrective action.
Additional information
- To access connector 54/3R see appropriate wiring diagram.
- To access control unit connector, see Central electronic module (CEM), replacing
- To connect a test box, see Connecting the breakout box
- Continue
Refer to Information