Repairing The Cable Harness

NOTE:

If an airbag(s) has deployed, the cable harness must be checked. See Checking The Collision Cable .

NOTE:

If an airbag(s) has deployed, the status of the reserve battery must be checked. See Checking The Reserve Battery .

Fig 1: Identifying SRS Control Module Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

The following pins are for Volvo On Call:

Connector at SRS control module: Pin B28 (yellow/white cable).

Connector at keypad: Pin 17 (yellow/white cable).

Fig 2: Identifying Connector Pins

Courtesy of VOLVO CARS OF NORTH AMERICA.

Repair the cable harness as described in Cable Harness SRS System, Repair .

NOTE:

The cable between the phone module (PHM) and SRS module (yellow/white) is joined in the cable harness and is routed to the central electronic module.