Connecting The Breakout Box

Fig 1: Identifying Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Expose the heater.

Fig 2: Releasing Catch Using Screwdriver

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position a screwdriver between the control module connector and its locking handle.

Turn the screwdriver to release the catch.

Continue pulling the locking handle outwards until the connector comes away from the control module.

Connect adapter 9511373 to the control module connector. Connect breakout box 9511428 to the adapter.

Disconnect the breakout box in reverse order.

For the location of the components, see Engine Coolant Heater, Component Location .