Release Contact Reel

Fig 1: Removing One Torx 20 Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove one screw (Torx 20).

Fig 2: Turning Contact Reel Counter-Clockwise Two Entire Turns

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel counter-clockwise to the end-position.

Fig 3: Turning Contact Reel Clockwise To Limit Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel clockwise two complete revolutions. Then turn clockwise until the screw hole is in position "one o'clock" as shown.

NOTE: On later car models, the yellow marking must also be visible in the window.