Checking Supply: Notes

Check passenger compartment fuse 24 (11C/24:2).

Check the cable between combined instrument panel supply relay (2/29) #3 and passenger compartment fuse 24 (11C/24:2) for an open-circuit according to Open-Circuit, Permanent Faults and a short-circuit to ground according to Short-Circuit To Ground, Permanent Faults .

Check that the relay is not defective.

Check the cable between combined instrument panel #1 and parking brake connector #1 for a short-circuit to ground according to Short-Circuit To Ground, Permanent Faults .

Check the cable between combined instrument panel #1 and combined instrument panel supply relay (2/29) #1 for an open-circuit according to Open-Circuit, Permanent Faults and a short-circuit to ground according to Short-Circuit To Ground, Permanent Faults .

Check the cable between combined instrument panel #14 and ground for an open-circuit according to Open-Circuit, Permanent Faults and a short-circuit to supply voltage according to Short-Circuit To Supply Voltage. Permanent Faults .

Remedy as necessary

Other information: 

• To connect the breakout box, see Connecting the Driver Information Module (DIM) Test Box .
• For other values, see Driver Information Module (DIM) Signal Description .

Was a fault detected? 

• YES 

  Refer to Verification 

• NO 

  FAULT NOT FOUND:  Troubleshooting has been completed.