Checking Supply
Check passenger compartment fuse 24 (11C/24:2).
Check the cable between combined instrument panel supply relay (2/29) terminal #3 and passenger compartment fuse 24 (11C/24:2). Check for an open-circuit according to Open-Circuit, Permanent Faults . Check for a short-circuit to ground according to Short-Circuit To Ground, Permanent Faults .
Check that the relay is not defective.
Check the cable between combined instrument panel terminal #6 and parking brake connector terminal #1 for a short-circuit to ground according to Short-Circuit To Ground, Permanent Faults .
Check the cable between combined instrument panel terminal #1 and combined instrument panel supply relay (2/29) terminal #1. Check for an open-circuit according to Open-Circuit, Permanent Faults . Check for a short-circuit to ground according to Short-Circuit To Ground, Permanent Faults .
Check the cable between combined instrument panel terminal #14 and ground. Check for an open-circuit according to Open-Circuit, Permanent Faults . Check for a short-circuit to supply voltage according to Short-Circuit To Supply Voltage. Permanent faults .
Remedy as necessary
Other information:
- To connect the breakout box, see Connecting the Driver Information Module (DIM) Test Box .
- Continue
Refer to Checking the Ground Terminal